Bell Standard Schrader Replacement Bicycle Inner Tube | 24 x 1.75-2.25

Compare and check current prices below.

Sports & Outdoors • Mold cured rubber for consistent side wall–prevents high pressure blow outs • 24″x1.75-2.25″ Schrader

  • Suited to sports & outdoors needs
  • Mold cured rubber for consistent side wall–prevents high pressure blow outs

Comparison Shopping Details

Compare and save!

Compare among the retailers below to get the best deal

Similar or comparable products to the product listed may be available from the retailers provided below.

Privacy Notice:
To protect your shopping privacy, we use a redirecting service to connect you to these retailers’ websites.

Amazon Associates / Affiliate Disclosure

As an Amazon Associate we earn from qualifying purchases.

We helped save you time and money? Want to tip?

Sports & Outdoors for everyday use

Tube Size First and foremost, you want to make sure the tube fits your tire. To determine the size you need to check the side wall markings on your tire where you’ll see two numbers separated by an ‘X’. The first number refers to the tire’s diameter. The second number refers to the tires width. Select the tube that has the exact same diameter as your tire. Your tires width should fall into the range of widths listed on the tube packaging. valve type, standard valve, presta valve Valve Type Standard (also called Schrader) valves are the most common valve type for bicycles. This short, sturdy valve is also used on car tires and other inflatables. Presta valves are typically found on performance road and mountain bikes. They have built-in valve locks which you twist to open before inflating. An easy way to remember is: ‘S’ is for Standard (Schrader, Short, Sturdy) and ‘P’ is for Presta (Performance, Premium). All inflatable tubes are subject to deflation from mis-installation and certain hazards. Flat Protection Finally you’ll need to choose whether to go with a standard or self sealing tube. Standard tubes are fine for most riding conditions. Self sealing tubes have liquid sealant inside that provides an extra layer of flat protection by sealing holes up to 1/8 of an inch instantly while you ride. It doesn’t get much easier than that!

  • Mold cured rubber for consistent side wall–prevents high pressure blow outs
  • High quality, reliably tested inner tube
  • Tube Weight – 190g
  • Valve type & length: Schrader; 35mm with cap
  • Brand: BELL
  • Size: 24″x1.75-2.25″ Schrader
  • Number of Items: 1
  • Product Category: Sports & Outdoors
  • Product EAN: 35011000695
  • Product GTIN: 35011000695
  • Product UPC: 35011000695